How to Build a Grow Room
If you’ve ever thought about growing cannabis indoors, you may have been faced with a tricky question; should I buy a grow tent or set up a grow room? If you’ve decided to go with the latter, we’re going to go over the basic things you’re going to need to turn a normal room into an indoor grow set up without needing to spend a ridiculous amount of money. Read on to find out exactly how to build a grow room for your cannabis plants.
It generally costs more to turn a full room into a grow room rather than simply buying a grow tent; you need to prepare the entire room so that it can efficiently hold and keep cannabis plants alive. Although it may cost a bit more, it’s definitely a much comfier way to grow cannabis. You can get larger yields, grow larger plants and have enough space to get everything done in the one room, which can be difficult in grow tents.
In order to set your grow room up properly, we’ve decided to cover it in this post; we’re going to go over the absolute basic materials needed to set up an indoor grow room. Get everything set up without needing to spend too much money.
Disinfecting and Hygiene
One of the first steps of any grow step is making sure that everything is properly clean. This is done when growing using both grow tents and growing in a room – you need to clean the room and disinfect it before you can start growing your cannabis. We recommend using a product called Purolyt to clean your grow room.
If you clean your room thoroughly before you start growing, you’ll be able to keep insect and fungi infestations at bay for much longer, which is incredibly important – if your indoor grow room becomes infected it can be quite hard to get rid of it for your next grow.
How to Build a Grow Room | Deciding your set-up
When growing in a wide open area such as a grow room, you’ll need to know how many grow lights you’re planning on using. In this case, we’re going to use two 600w HPS grow lights in a 2 x 2 x 2.2m room. If you want to follow this method, you can also use three 315w LEC lights for similar results.
The amount of lights and their wattage has a direct impact on the strength of your extraction fan and inline fan.
Grow Room Reflective Sheeting
You need to block any and all light from getting into your grow room. You’ll also need to get proper reflective sheeting in order to cover the walls, floor and ceiling of your grow room. You can cover the walls to about a meter and a half if you want to save on materials. We recommend using a stapler to attach it to the walls and ceiling, as double-sided tape can easily come unstuck once the room heats up.
How to Build a Grow Room | Setting up your ventilation system
Once you’ve covered the room with reflective sheeting, you’ll need to prepare your air intake and extraction system. First, make sure nothing can be seen from outside your apartment through the window.
Many people think that the best way to set this up is by placing the extraction duct at the top of the window and the inline duct at the bottom. This is a major mistake – most likely you’ll end up taking in the exact same air that you’re trying to ventilate out of the room. One of the most simple ways to do this is to use the window to extract air and then make a grid on the door to the room. This is called passive intake and doesn’t require any sort of inline fan.
You may have other options though, depending on the size and set-up of your grow room. Most rooms used for growing only have one window, although if your room has a different set up, feel free to make your own extraction system, this is just the simplest set up.
Once you know where you’re going to be setting up your ventilation system and how you’re going to be supplying fresh air, you’ll need to install the extractor fan and inline fan, if you’re using one.
Extractors can be noisy and cause vibrations that can travel through the wall and floor, which can be heard from other rooms and floors. You’ll need to use a soundproofed box in order to avoid this. It’ll have to be attached to the ceiling, and you can use a frame designed for this purpose or a chain system using rubber rings which stop vibrations from travelling up through the ceiling.
When it comes to the inline fan, if you’re going to use one instead of just using a passive intake vent, it’ll need to be on the other side of the room in comparison to the extraction fan. You’ll need to place it down low. If possible try and use some sort of cushioned base to avoid the vibrations travelling through the floor.
Once you’ve set up your ventilation system and everything is in its place, you’ll need to add a carbon filter. You can do this when preparing the grow room or wait until your plants are flowering. It’s much easier to set it up at the start, although you’ll be using it more than you need to. If you wait until the flowering period the filter will last much longer.
In order to attach it to the ceiling you’ll need to use rope and eyebolts. You’ll also need flexible aluminum ducting in order to connect the filter to your extraction fan. If you want the best possible ventilation, try and center the filter as much as possible.
How to Build a Grow Room | Connecting your Aluminum Ducting
Like we said before, you’ll need to connect the filter and extraction fan in order for them to work correctly. Use clamps to attach the ducting to your filter, and do the same with the other end to the extractor fan. Try and keep the ducting as straight as possible to keep the airflow strong. Lastly, you need to connect your extractor to wherever you’re planning on extracting hot air.
If you have an inline fan it’s not that hard to attach the ducting, the difference is the size of the intake fan, which is usually smaller than the extractor. You can also do this using clamps to make it easier.
Once you have your extraction system, intake and filtering system installed and you’ve covered the walls in reflective sheeting, it’s time to start installing your lighting kit.
The best way to do this is to keep your ballast outside of the grow room due to the amount of heat that they generate. However, this may be an added benefit when it comes to growing during colder months, although during the springtime and hotter months it’s not a good idea. If you can’t keep it outside of your grow room, you’ll need to place it on a wooden shelf up high and as far away as possible from your plants.
In order to hang your lights correctly, you’ll need to measure out how much space each light is going to cover and find the exact center of the bulb in order to make the right hole in the ceiling for your plants.
Although you have a ventilation system, you’ll still need a way to move air around your room. We recommend using standing fans or clip-on fans on the wall if you have the space, although the choice is yours. You’ll need to place them strategically in order to help distribute any new air you’re taking in so that you don’t end up with stagnant air pockets. Cannabis plants need constant fresh air to survive.
Growing indoors requires quite a lot of electric devices that need to be turned on and off at specific times; you’ll need to use a timer system in order to keep them working properly. The best way to do this is to get a full controller system that allows you to program everything on the one system.
You should try and place it somewhere that you can get to easily while also keeping all of the cables in order. We recommend installing a fire extinguisher above the controller in case of emergencies.
Once you’ve set up everything else in your grow room that you need to successfully grow cannabis, you’ll need to check that everything is working correctly so that you can germinate your cannabis seeds. Before doing this, you should place a thermos-hygrometer between your lighting systems in order to check the parameters that you’ll be growing at.
You might have just the right temperature for growing cannabis, although humidity levels will probably be much too low for cannabis plants to grow properly during their first few weeks. This is due to the fact that you’re growing in a large room; it can be complicated to maintain the temperature and humidity at the right levels when compared to growing in a grow tent.
When working in such a large space you’ll need to add humidity to the air somehow, and the best ways to do this is by using a humidifier, or maybe even a few. During your plants’ first few weeks, relative humidity needs to be a bit higher than usual – if it’s not, your plants may not grow to be the best that they can be.
For the best results, you should place the humidifier in the middle of the room alongside a fan, which helps to distribute humidity evenly. If you can, try and move it to the other side of your plants after a few hours in order to avoid the plants closest to it getting a bit too much humidity, which can end up causing fungi.
How to Build a grow Room | Conclusion
When it comes to growing cannabis indoors, setting up an entire grow room can be a bit more complicated and costly than a simple grow tent.
The most important things to keep in mind are that nothing should be seen from outside the room and your extraction system and filter should be working properly; if not, you may get in trouble.
This particular post is designed for those that are going to be growing using two 600w lights and only details the basic materials needed. If you have a better set up or use more advanced methods, that’s great! This is simply a basic guide for an affordable indoor grow set-up for those that have never grown in a room before.
If you want to grow cannabis indoors but don't know how to build a grow room, don't worry! We've designed a guide to show you what you need & how to use it
Indoor Grow Room Setup
Indoor Grow Room Setup
Whether you’re a brand new cannabis grower or a master budsman, it’s possible that you have not yet considered setting up a grow room in your own home. Why not? What was once considered a complicated and costly investment has become quite simple thanks to modern technology and our helpful guide!
Planning Your Grow Room Setup
The most critical step to any successful indoor grow room is planning. A few extra moments spent planning can yield better results and save you money in the long run. Make sure to sketch out the general floor plan of the room you have chosen. Remember that in general, any size room will do, provided it can be heated and cooled. Things may be easiest if you have an exterior wall or door available for venting purposes. Sketch out how and where you plan to hang your lights and place your pots or beds. We suggest hanging lights from adjustable chains so that you can ensure they always remain an optimum distance from your plant.
Insulating the Grow Room
It is critical to insulate your grow room so that the temperature remains constant. Insulation also helps with humidity and cooling concerns. Roll insulation is the most commonly chosen material to use for insulation. We recommend that you paint the walls and ceiling white or use white plastic to help protect the walls and floor while reflecting light.
Controlling Your Room’s Climate
Now is also a good time to decide how you plan to handle ventilation and humidity control. In a small home setup, you can opt for a simple solution: install an opening near the floor on one side of the room, with a bent PVC pipe leading outside to allow in the fresh air. The bend in the pipe will prevent light from entering but will make sure that you and your plants have a fresh supply of oxygen at all times. In order to filter the heavily scented air that will be leaving the room, attach a carbon-filtration system to an external vent leading outside, closer to the ceiling (because of warm air rises). An alternative to this – which can work if your room does not have an exterior wall – is to modify a door to serve the same purpose.
Fans should also be placed around the grow room to assist with humidity control. Humidifiers and other equipment that automatically monitor the temperature, humidity levels, and other conditions in your grow room are available for purchase if you decide that you would like to make that investment – some even allow for you to control them from your mobile device! But know that these tools are not required in order to get started, or to grow cannabis at home, successfully.
Potting Your Plants
We recommend using 30-gallon or 45-gallon fabric pots for the actual planting of your cannabis seeds, placed upon a grate-system for easy drainage when flushing or watering. Fabric pots will obviously leak directly onto whatever surface they are placed on, so building a simple grate-topped table with a drainage system underneath, will help tremendously with cleanup and management of humidity in your grow room.
Another option is to line your floor with plastic and to place saucers underneath each plant when watering. If using this method, just remember to always remove and clean the saucers afterward, otherwise, they can become a thriving environment for mold growth.
Whether you're a brand new cannabis grower, or a master budsman setting up a grow room in your own home is simple with this guide!