Dabbing: Everything You Need To Know
Dabbing is a new way of consuming cannabis and refers to the process of inhaling the vapor produced when heating the surface where the concentrate will heat up, but in order to do this, you’ll need a dab rig.
Dabbing is a cleaner way of consuming concentrates, it basically consists of vaporizing your extracts and you only need a bong, a nail, and a torch!
1. What Is A Dab Rig?
A dab rig is very similar to a bong used to vaporize cannabis concentrates, a dab rig filters the concentrates vapor through water and requires a nail or “banger” that is heated to hold the dabs and evaporate it.
As you can see in the video below, our team had a small dab session at the 2019 edition of Spannabis, here you can see how a dab rig works and how to properly dab!
Dabs are basically any type of extract that can be smoked by placing it on a hot surface (nail, banger, or bowl), these dabs are basically budder, shatter, wax, or any other extraction that has a high THC concentration, these products are much more stronger than regular cannabis, for example, extractions can contain up to 90% THC while buds have about 10-15%.
There are several ways to make dabs but most of the methods are quite expensive, so if you cannot buy them at your local dispensary, you can learn how to make dabs with a hair straightener and other materials you probably have at home.
2. Smoking vs Dabbing
There are important differences between smoking and dabbing, now, there are right and wrong ways of dabbing but if you’re dabbing correctly you will be inhaling vapor instead of smoke like you would when smoking flower, this means that dabbing is a cleaner alternative.
Also, when dabbing, you’ll be consuming around 95% of the cannabinoids present while smoking flower you are only inhaling 12%, and inhaling smoke so you are actually hurting your lungs, similar to the risks of smoking tobacco and this can be damaging to your lungs over time.
3. Parts of a dab rig
Dabbing has become known lately due to the legalization of cannabis, especially in the US.
Nowadays dabbing is super popular among avid consumers but even though it’s not super hard to do it, beginners need to know the different components to be able to use them properly.
A rig is a specialized pipe or bong that can be used for concentrates, the main difference between a bong and a dab rig being the nail which is the bowl used for dabbing.
Rigs come in different shape, sizes, and materials like silicon and glass, now, you will be able to dab in any rig but the best one depends on what it’s better suited for you and what you can afford.
The nail is the most important part of the dab rig, this is the part you’ll heat in order to vaporize the extraction and then dab.
Nails, bowls, or bangers need to withstand extremely high temperatures so you can find nails made out of different materials like quartz, glass, titanium, and ceramic, each one of them having its own pros and cons
Ceramic nails can’t withstand heating and cooling very well so they will eventually break and also take the longest to heat but is great at maintaining heat so you won’t have to heat it up as much as the other materials.
Quartz nails have a good heat retention just like ceramic nails but it heats up really quickly so you don’t have to worry about heating it constantly but overheating can cause fractures so you have to be careful, also, quartz is super fragile so you will need to be careful not to drop it.
For avid dabbers, titanium nails are the best type. Titanium is almost indestructible, so they won’t crack even if you drop them, they also heat up very quickly but it’s said that titanium nails can affect the flavor so it’s not the most recommended.
The dabber tool is a long tool that is used to pick up your concentrate and apply it to the heated surface (nail, banger, or bowl).
This tool also comes in different materials but there’s no big difference other than their durability, you can also find dab tools that come with a carb cap on one end, so you can cover the bowl as soon as you placed the concentrate in the bowl.
The carb cap is an accessory that serves as a cap that regulates airflow and helps trap the heat on your nail, allowing you to inhale all the vapor.
The torch is needed to heat up the bowl, there are several models but they all work with butane, usually, when going to a smoke shop you’ll find refillable torches or a torch head that is attached directly to the butane refill.
Now, having a torch and a butane canister might seem dangerous but luckily for you, there are two alternatives: e-nails and electric dab rigs.
An e-nail is a tool that you place around your nail, this equipment goes directly in the power outlet and has a controller that lets, not only choose the temperature that better suits you but also maintain that temperature for as long as you want to.
Electric dab rig
An electric rig is similar to the e-nail with the main difference being that, while the electric rig is a complete dab rig that heats up electrically and comes with all the tools necessary to start dabbing right away, the e-nail is an accessory to improve your glass dab rig.
A silicon mat is no obligatory but it may make your life easier because, as you may know, dabs are quite sticky but the silicon mats are made with a special material that dabs won’t stick to, making it easier to manipulate your extracts.
4. What can improve your dab session?
If you’ve just started dabbing, you can use whatever you want as long as it works but if you’re looking to get serious about it, you should look for a rig designed for dabbing.
To help you choose the best one, here is what you should look for:
Size is an important factor to consider when buying a rig, you want as little distance from the nail to the mouthpiece (where the smoke comes out), this is because the longer the vapor travels, the more dab you lose and this happens because the vapor condenses on the walls of your dab rig, and you end up losing precious resin.
Dab rigs can have percolators or filters that help cooling down the vapor but can also condense the vapor and you’ll end up losing part of your extract.
Now, percolators and filters are good but you should look for percolators/filters with fewer holes and make sure the percolator also holds water so you don’t hurt your throat with the hot vapor.
5. How to dab the right way
First of all, let’s start by saying that even if you’re a medicinal patient you can still dab, despite most concentrates having way more THC than CBD, by following the table below you are able to consume just the terpenes that you need to, benefiting from their therapeutic effects.
Taking a dab is not hard at all but due to the several tools, it’s harder than just rolling and smoking a joint.
One of the biggest challenges is to dab at the right temperature, so here are three basic steps to help you dab the right way!
- Have all your tools ready
In order to dab, you need to have the blowtorch, dabber, rig, carb cap, and, obviously, your extraction ready so you can scop up the concentrate and take your dab right away.
Depending on the material, the heat emitted by your nail may heat up the rig and because it has water in it, can end up cracking so if you’re using a torch, it’s better to start heating the nail slowly until you reach the desired temperature.
- Take your time
Once your nail is completely red, give it 1-1.5min to cool down so the vapor isn’t harsh on your throat, and then just place the dab on the nail and dab!
Keep in mind that dabs are up to 5 times stronger than buds so you should be careful if you’re not an avid smoker.
Your rig should be cleaned thoroughly once every 1-2 weeks but the nail or bowl should be cleaned after every dab because the leftover resin will burn if you heat it over and over, luckily for you, this is fairly simple.
After you’ve taken your dab, just use a q-tip to absorb the resin left in your nail or bowl, this will ensure you experience the proper flavor every time you dab.
Now, after a couple of weeks of dabbing, you will see a lot of resin on the sides and percolator/filters and when this happens, it’s time to clean up the whole dab rig.
Cleaning your rig is fairly simple but takes a bit of time, to make it simpler we’ve come up with step-by-step instructions, you’ll need:
- A large Ziploc bag
Fill the Ziploc bag with rubbing alcohol and add around 4 tablespoons of salt.
Put your dab rig in the bag, close it, and shake it for 1-2 mins.
Check if your rig is clean, if there’s still some resin stuck to it just close the bag and shake it again.
Rinse your dab rig with water to remove all the alcohol and salt, let it dry and it’s ready to be used again!
7. The perfect dab: tips and tricks
Use a silicone mat to prevent your dabs from sticking all over your table and also to keep your rig in place, a silicon mat serves as an anti-slip surface so you don’t risk dropping your dab rig.
Don’t overheat your nail, dabbing at just the right temperature ensure you don’t burn off the precious terpenes.
Always clean your nail after dabbing to prevent a buildup of burnt oil which will end up affecting how your dabs taste.
You can use an infrared thermometer (Temp. gun) if you want to take dabbing to another level but most dabbers just wait for the nail to turn red and wait 1-2min, depending on the density of the smoke they desire.
8. In conclusion
Dabbing is one of the newer easy to consume cannabis, although dabbing is more popular amongst avid cannabis consumers, it’s a great way to smoke without actually carburating weed but remember that dabs are concentrates and can be overwhelming for beginners.
It doesn’t matter if you dab oil, dab wax or you’re dabbing shatter, if you’re an avid dabber, feel free to leave your tips and tricks to help fellow smokers, leave a comment in the comment section below!
Everything you need to know about dabbing, a dab rig, and how to take perfect dabs!
10 Best Glues To Fix Any Bong – no3 is Awesome!
There’s nothing else quite like finding the perfect glass bong. It sits in your hand just right, smokes like no other, and catches every eye in the room. Of course, you want to show it off and pass it around, but then it happens: “that friend” knocks over your beautiful new glass. It hits the ground and you hear that painfully familiar glass-breaking, heart-breaking sound.
So there it lies, broken beyond use. Your friend is full of apologies and guarantees to replace it, but you wanted to smoke NOW. Fortunately, you’ve got just the tool for the job – the perfect bottle of glass glue. Just a quick patch job and your smoke session will be rolling right on time.
Is it safe to use super glue on a bong?
This is important, so take note: do NOT use glue in the areas that actually meet open flame, namely the bowl itself. If your bowl breaks, you’re better off replacing it or just rolling a paper while you work on replacing your glass. But if anything else breaks, especially if it’s a nice clean break, it is absolutely safe to glue the pieces together!
What is the best glue for glass?
With all these awesome adhesives, it’s hard to point out a single best one. Mostly it comes down to your needs and equipment. But you can rest assured that these are going to repair your broken glass and get you back to that sweet herb in no time.
E6000 Craft Adhesive – $9.33
This industrial-strength craft adhesive is our top pick to get your broken glass back in working order. It’s trusted by thousands from hobbyists to professionals, dries totally clear, and is absolutely waterproof. This all-American product is even heat resistant so you can safely fix minor breaks on dab rigs without worrying about the torch hurting your repair job (but still absolutely NO using this in the actual bowl/banger!).
Loctite Glass Glue – $2.82
We couldn’t make a list of the best glass adhesives without this longtime favorite. Loctite glass glue is one of the oldest and most recognized names in the adhesive world. It dries clear and is sure to get your broken glass back together in one try.
Gorilla Clear Glue – $7.84
Another well-established, trusted name in the adhesives world is Gorilla. They make some of the strongest adhesives in every form imaginable, and now you can have all that power in a clear, non-foaming glue. Once you get your glass back together, use this awesome glue for other repair jobs around your house, inside and out!
Rhino Ultra Glue – $14.95
While we’re talking animal-themed adhesives, Rhino is another powerhouse in the glass glue world. It’s fast, tough, and will bond practically anything. The stress-resistant formula helps resist drops, scrapes, impacts, moisture, heat – everything you’ll be throwing at it after you put your pieces together again.
The Original Super Glue Glass Adhesive – $10.47
A list of the best glues wouldn’t be complete without The Original Super Glue. This special version of their classic product is made specifically for glass-on-glass use. However, it’s important to note that this particular glue cures with UV light, so you’ll either need to let it sit outside in sunlight briefly or cure it with a UV lamp.
Beacon Glass, Metal, and More – $8.99
This waterproof, weatherproof glass glue will make sure you get your broken bong like new in no time. Part of what makes this repair broken glass so well is its ability to grab onto surfaces fast, so you don’t have to hold it in place until the glue sets and your arm falls asleep. Once you feel it set well enough to stay, just leave it and rest assured that your bong will be back by your next smoke session.
Weldbond Multi-Purpose Adhesive – $8.58
If you’re trying to make your investment go as far as possible, way beyond just something you can use to make your glass still works well, give Weldbond a try. It acts as a sealant, an adhesive, is non-toxic, and non-flammable. The only drawback here is you’ll have to take a bit more care when you use it to repair your glass. There’s also a 24-hour recommended wait period to let this one fully cure, so make sure you can clamp your glass or have a nice clean break that can stand on its own.
Pratley Quickset Clear Glue – $8.95
This two-part glue is one of the best around if you don’t mind doing a little legwork to mix it up. Just mix equal parts of the two tubes, stir it up, and you’ve got one of the best epoxies around for glass repair. Make sure you use it within three minutes from the time you mix the two parts together, or it could dry up too soon!
Nano470 Glass Glue – $35.09
This is the biggest powerhouse of all these adhesives. It’s truly “construction strength,” meaning it can even handle serious load-bearing work. While we doubt your bong will be doing much heavy lifting, it can certainly be reassuring to know you’ve got such a powerful adhesive holding yours together like new. This is another that needs UV light to cure, so make sure you have a plan to shed some light on it!
CAT PALM B-7000 Adhesive – $9.99
This adhesive comes in a handy, needle-tipped bottle so you can glue with precision every time. It’s waterproof, weatherproof, and dries fast as well. And if you get it on your hands, no worries – it’s soft on the skin and easy to clean off.
Once you’ve overcome the heartbreaking breaking glass, just pick up the pieces and try one of these great glues. You’ll be back to smoking your piece like new in no time. Again, NEVER use adhesives or the likes around your actual bowl or banger; burning these could release toxic fumes into your hits.
If you’ve already got your Loctite glass formula on hand and would like to get further into bong repair, check out these topics:
- How to fix a broken bong stem?
- How much does bong repair cost?
- Can you hot glue a bong back together?
There’s nothing else quite like finding the perfect glass bong. It sits in your hand just right, smokes like no other, and catches every eye in the room. Of course, you want to show it off and pass it around, but then it happens: “that friend” knocks over your beautiful new glass. It hits the ground and you hear that p