Just like humans, cannabis and hemp plants are considered dioecious, meaning they have either male or female reproductive organs. Depending on the goal of the The short answer to whether or not male cannabis plants produce female seeds is no. The longer answer is also no, but requires a little more explanation. Learn about marijuana life stages and gender. When does the plant start flowering? How can you tell if your plant is a boy or a girl? What…
Male vs. Female Cannabis- Why it’s important to know before you grow
Just like humans, cannabis and hemp plants are considered dioecious, meaning they have either male or female reproductive organs. Depending on the goal of the cultivator, it’s crucial to know the gender of their plants prior to harvest.
Both male and female cannabis plants have their benefits; growing both can result in cross-pollination and thus seeds, resulting in new genetics or seeds for the next crop. However, if your goal is to produce quality buds rich in cannabinoids, it’s crucial to isolate the males from the females to avoid pollination and seed production. Cannabis pollen is extremely potent; studies have shown that pollen can drift across 3 to 7.5 miles, and can reach over 30 miles if high winds are present.
Removing males will allow the female plants to grow abundant, seedless buds (called sensimilla ). When female plants are left unfertilized, they use that extra energy meant for reproduction to produce higher levels of cannabinoids like THC or CBD, depending on the strain. The resinous buds consumers purchase at dispensaries are all sensimilla.
How to Visually Determine the Sex of a Cannabis Plant
Cultivators can visually determine the gender of their plants about 4-6 weeks into the growth cycle (though this may differ for indoor grows) when the plant is transitioning from its “vegetative” stage into the “flowering” stage. At this time, the plant is no longer focusing its energy on growing bigger and taller and instead spends all its effort growing flowers for pollination and reproduction.
When a cannabis plant is beginning to enter the flowering stage, cultivators should pay careful attention to the area between the nodes of the plant, where the leaves and branches extend from the stalk. Pre-flowers will begin to form in the nodes of the plant, and characteristics of the pre-flower will vary based on gender.
Pre-flowers can initially be difficult to examine with the naked eye, but growers can use a magnifying glass to get a closer look. Female cannabis pre-flowers grow as tiny bracts which will eventually produce hair-like stigma; male plants produce small, round balls as the nodes.
In some cases, a plant may exhibit both male and female pre-flowers. Hermaphrodite cannabis plants can occur when a plant becomes excessively stressed due to things like plant damage, bad weather, disease, nutrient deficiencies, and poor genetics. Hermaphrodites can also produce anthers, often referred to as “bananas” due to their appearance. It’s important to monitor plants that have been exposed to stressors to ensure they don’t begin to develop both male and female genetics. Hermaphrodites are capable of producing pollen and can ruin an entire crop.
How to Determine Gender Before the Pre-Flower stage
Lab genetic testing can determine a plant’s gender as soon as it begins to sprout its second set of true leaves. Knowing sooner can help cultivators save money, increase canopy space, and decrease labor costs associated with transplanting, watering, monitoring, training, and removing unwanted male plants.
Just as humans have X and Y chromosomes, cannabis also has a genetics system that determines the plant’s gender. However, figuring out the gender based on the DNA of a plant prior to the flowering stage is not as simple as looking for an X and Y. Luckily, the specific genetic sequence that differs between female and male plants has long been discovered, so using quantitative polymerase chain reactions (qPCR) allows labs to determine the gender of any plants with 100% confidence.
When a sample is brought in to Infinite Chemical Analysis Labs for gender identification, qPCR analysis is used to determine if the plant is female or male. A small hole is cut out of the leaf of the plant and added to a lysis solution to destroy the plant cell walls, exposing the DNA. After isolation of the DNA, it is transferred to another plate that contains reagents to amplify and cause the sample to create a fluorescent light that our qPCR instrument then quantifies, and determines the gender of the sample based on the amount of fluorescence.
Between sufficient lighting, proper nutrients, a detailed watering schedule, and constant monitoring, identifying the sex of your plants is another tedious yet crucial task that could make all the difference come harvest season.
Gender identification testing is now available at InfiniteCAL to help cannabis and hemp cultivators take the guesswork out of their grow. If you’re interested in learning more about Gender Identification Testing, reach out to our team at [email protected] .
Do Male Cannabis Plants Produce Female Seeds
While cannabis is a dioecious plant (meaning it can be male, female or hermaphroditic), the short answer to whether or not male cannabis plants produce female seeds is no. The longer answer is also technically no, but requires a little more explanation. No worries, we’ll introduce you to the basics of feminized cannabis seeds as well as what you can do with male cannabis plants. Let’s dive into it.
Understanding male, female and hermaphroditic cannabis
We mentioned cannabis is dioecious. While that may not seem out of the ordinary since humans are also dioecious, it’s an incredibly rare trait. Only about 7 percent of all flowering plant species produce separate male and female plants. And this matters because all the cannabis we consume is sinsemilla (seedless females). Our guide to sexing cannabis makes identifying what you’re working with quick and easy. In brief, male cannabis plants produce pollen sacks, and females produce pistils. It’s also possible to have hermaphroditic plants, although these tend to be a result of stress. However, there are full-genetic hermaphroditic strains that produce both pistil and staminate.
Most of the time, non-genetic hermaphrodites are either fully hermaphroditic or females with some male flowers. Male cannabis plants will very rarely produce female parts, but it can happen. In the rare event that this happens, the seeds would also likely be nonviable. Because if the plant is predominantly male and manages to produce viable seeds, the odds of getting female seeds are next to impossible. The offspring in this scenario should only be XY.
So how are feminized seeds produced?
Bottom line, cannabis is genetically wired to produce an equal 50:50 split between male and female seeds — unless growing from clones. Still, the methods we have for producing feminized seeds aren’t bulletproof. Feminized seeds will be about 99 percent female, but it’s still possible (albeit unlikely) for a rogue male to sneak in. Put another way, a 99 percent guarantee is better than pretty much any birth control I’ve ever used in my entire life, and I still don’t have kids. Those are pretty good odds.
The feminization process involves forcing the female plants to produce pollen and thus pollinate other females resulting in only XX offspring. There are basically two routes to feminized seeds. The first is using topical solutions to spray onto female plants, forcing them to produce male pollen sacs. Keep in mind these plants are non-usable for smoking after spraying — consider them a write-off. The second route involves taking advantage of the unnature state of sinsemilla.
It would be very unnatural to see a sinsemilla plant in the wild. The pollen from a male’s pollen sacs can pollinate female plants up to 2000 miles away, although realistically, it’s about two miles. If left past the prime harvesting stage of maturation, sinsemilla will produce male pollen sacs as a final attempt to self-pollinate. Self-pollinated sinsemilla will naturally produce all XX female seeds.
So what’s the point of keeping male cannabis plants?
Can’t produce feminized seeds or enough cannabinoids to be consumable, plus the potential to ruin a harvest? It seems like the cannabis grower is on a crusade to wipe out males! Realistically, there are still a few purposes for male plants other than to be diced up as fertilizer. Male plants are essential for breeding and can actually be used to produce cannabutter for edibles and infusions. It may not result in as intense of a high, but there’s certainly some value in keeping your boys around. Of course, nowhere near your females unless you’re looking to breed.
Follow CLN for all the latest growing tips, tricks and cannabis news.
Male vs Female Cannabis Plants
Did you know there are both male and female marijuana plants? Yes, marijuana plants show gender, and the sex matters a lot to the grower.
That’s because only female plants produce buds. How do you grow female plants?
Regular marijuana seeds will be 50% male, and 50% female. That means half of the seeds will be unusable as far as growing buds.
One way around this is to purchased feminized seeds online. These seeds are available from all reputable online seedbanks, and the plants produced by these seeds are always female.
You can also make your own feminized seeds, but you have to start with two known female plants.
When do marijuana plants reveal their gender?
Cannabis plants go through two stages of life, the “vegetative” stage and the “flowering stage.”
They first go through the vegetative life stage, which you can sort of consider its “childhood” since the plant is only focusing on growing bigger and taller, and gender doesn’t matter. At the beginning of this stage you usually can’t tell what the plant’s gender is.
However, once the plant is about 6 weeks old, it will usually show signs of “pre-flowers” which will alert you to the gender before the beginning of the flowering stage.
Pre-Flowers usually reveal the gender around week 6 from seed
Otherwise you must wait for the flowering stage
Next, cannabis plants switch to the flowering stage which means they stop growing bigger and taller, and instead spend all their effort growing flowers (the buds we want are flowers!). The flowering stage is like the “adult” stage of a cannabis plant since at this point it’s only interested in adult stuff like growing their male and female parts, then pollinating In the flowering stage, plants start growing buds or pollen sacs in earnest. The buds we want are female flowers, so growers generally only want to grow female plants.
Growers Want Female Cannabis Plants – These Produce Bud
Regular Marijuana plants reveal their gender in two situations:
After spending a long time in the vegetative stage – some strains/plants will show preflowers (pistils for girls and “balls” for boys) during the vegetative stage if they grow old enough, even when they are constantly kept under a vegetative light schedule. For example, clones can come from plants that are several years old, so you’ll see a lot of clones have female pistils showing, yet will not continue to flower any more than that until after they’ve been switched to a Flowering (12-12) light schedule
Otherwise, all remaining plants will reveal their gender in the first 1-3 weeks after lights are switched to 12-12, and plants enter the flowering stage of life.
When your cannabis plant is about to reveal it’s gender, what you’re looking for is cannabis “pre-flowers.” These usually show up when the plant is around 6 weeks old from seed, but they always appear once the plant is changed over to the flowering stage.
Male and female pre-flowers look different from each other (though it can be easy to confuse them at first). Sometimes it’s hard to tell which is which at first, and in that case you’ll just have to wait until they develop a few more flowers and it becomes more obvious.
Diagram Showing What Pre-Flowers Look Like
Male pre-flowers on left – Female pre-flowers on right
Female Marijuana Plant Pictures
Female marijuana plants take a bit longer than males to show their first signs after being changed over to flowering.
Female marijuana plants start showing one or two wispy white hairs where their buds are going to start forming.
They usually first show up where the main stem connects to the individual nodes or ‘branches’.
If a female plant is kept in the vegetative stage long enough (the length of time varies depending on the strain and conditions), then she will start showing the first sign of female hairs even before you move the plant into the flowering stage by changing the light schedule.
If you see wispy white hairs appearing on your plant like the ones pictured below, then you know you have a female plant.
Click on thumbnails for larger picture
In this pic, you can see white pistils emerging from the calyxes. Female pistils are white and wispy, never green.
This pre-flower doesn’t have a pistil sticking out at first, but the shape helps tell you it’s a female plant. If you’re not sure about gender after spotting a pre-flower, it’s a good idea to wait and see for a little while, just to see if a white hair appears (which means it’s definitely a girl)
Adult Female Cannabis Plant Pictures
Those buds turn into this!
Male Marijuana Plant Pictures
Male plants have grape-like balls which form and fill with pollen. The balls will first show up a week or two after changing the plants over to the flowering stage. If the male is allowed to continue growing, eventually these pollen sacs will burst open and spill pollen everywhere.
A small male pre-flower – this is what male plants look like when they first reveal their gender
These male pre-flowers are basically immature pollen sacs. When the plant starts flowering, they will grow and turn into bunches that almost look like grapes.
Click on thumbnails for larger picture
Uncertain pre-flower – ended up being female!
Sometimes it takes a day or two for a female pre-flower to release her first pistil, and the female calyx can look like the beginning of a pollen sac. Generally the more “pointy” ones tend to be female, but sometimes you have to wait and see a few more flowers to know for sure.
Marijuana plants go through 2 life stages: Vegetative and Flowering
Quick Key to Light Schedules For Photoperiod (Non-Autoflowering) Strains
This key breaks down some of the terms used in the article below such as “24-0″ or 12-12”
Vegetative – Indoor cannabis plants kept on these light schedules will display only vegetative growth
18-6 – 18 Hours Light / 6 Hours Darkness each Day
24-0 – 24 Hours Light / 0 Hours Darkness each Day
Flowering – Indoor cannabis plants on this light schedule will start growing flowers (buds)
12-12 – 12 Hours Light / 12 Hours Darkness each Day
* Most indoor growers use a timer to turn their lights on and off automatically.
The first stage, “Vegetative” begins when they first sprout, at the beginning of their life.
Most growers give their plants 18-24 hours of light a day during the vegetative stage.
When a plant is about half the final size you want it to be, you should change it over to the “Flowering” stage.
The second life stage, “Flowering,” is the stage your plant will remain in until harvest..
You get marijuana plants start flowering (making buds) by changing your light schedule to 12-12.
That means you use an electric timer to automatically shine your grow lights for 12 hours a day, with 12 hours of uninterrupted TOTAL darkness during the plant’s “night period.”
Marijuana plants should reveal the first signs of their gender within 2-3 weeks after being changed to 12-12.
How Light Schedules Affect Marijuana Life Stages
Marijuana plants have an internal process where they can detect how long they receive uninterrupted darkness each day.
In the wild, as the days get shorter and nights get longer, the marijuana plant “realizes” that winter is coming and will start budding/flowering as it approaches the end of it’s lifecycle.
When growing marijuana outdoors, a grower doesn’t need to do anything to induce flowering because the sun will take care of things on its own. All you need to do is make sure your plant isn’t directly under a street light or other light source, so that the plant receives complete darkness at night.
However, when growing marijuana indoors, a marijuana gardener will have to “fool” their plants into thinking winter is coming to induce flowering and kickstart the creation of buds.
This is done by changing the plant’s light schedule to 12-12, where the weed plants gets 12 hours of light a day and 12 hours of total darkness.
It’s easier to ensure the plant gets the 12 full hours of darkness each night when the start and end time for your lights to turn on and off is exactly the same each day. This is why most growers end up getting a timer to turn their lights on and off automatically.
I tend to set my timer in flowering to shine line from 7pm-7am. This gives me time to check on my plants at night when the lights first come on, and I can also check them quickly in the morning before I go to work. It also keeps things cooler since the lights are on at night. Some people (like myself) also get discounts on electricity that’s used at night.
But ANY 12 hour dark period will work, as long as you prevent your plant from getting light leaks during their “night.”
In fact, with marijuana plants, the length of night period, not the length of day period, seems to make the biggest difference. This makes sense if you consider that in the wild, a stormy or cloudy day could shorten the light period a plant receives, but few things in the wild will interrupt the darkness of night.
This has been experimentally verified by some out-of-the-box thinkers. They gave marijuana plants different amounts of light and dark, then watched what happened.
What they found is that a marijuana plant will stay flowering as long as she gets 12+ hours of darkness on a regular basis. The length of day period didn’t seem to matter at all. In fact, you could give plants 12 hours of dark followed by 24 hours of light, on a regular basis, and plants would continue to flower as long as their darkness was uninterrupted for 12 hours at a time.
Check out my marijuana grow light guide for more info about picking out the right grow lights for your situation!
Photoperiod dependent strains vs. auto-flowering strains
So all strains of cannabis that respond to light in this way (where the light period effects what stage they’re in) are called “Photoperiod dependent” strains.
“Auto-flowering” marijuana strains pretty much ignore how much light they get each day. Generally you don’t run into these unless you buy them particularly from a cannabis seed bank.
Marijuana plants have a gender: Is my plant Male or Female?
(Some marijuana plants can also be hermaphrodites, which means they display both male and female parts on the same plant)
Most growers prefer to grow female plants, as only female plant produce buds/flowers.
Note: Once the plant is about 6 weeks old from seed, it will usually show signs of “pre-flowers” which will alert you to the gender before the beginning of the flowering stage.
Pre-Flowers usually reveal the gender around week 6 from seed, or you can wait until the plant switches to the flowering stage.
After 2-3 weeks of the 12-12 light schedule, most marijuana plants will reveal the first signs of their gender (they either are a female plant and start growing buds, YAY! or they are a male plant and start growing balls, NO!).
Why do I not want male marijuana plants?
Only a female marijuana plant makes flowers/buds that contain a usable amount of THC. Male marijuana plants only make pollen sacs that they use to fertilize the females. Most growers will throw away any male plants that they encounter to keep them from fertilizing the female plants. If your female plants do get fertilized, they will use all their energy to produce seeds instead of making buds. This is good if you want seeds, but you will run into the same problem since half of the seeds will also be male.
If you would like to start a breeding program to make your own hybrids, I recommend using a method that creates all-female (feminized) seeds so that you don’t waste time having to identify and throw out male plants.
Getting clones of female marijuana plants or buying feminized seeds online from a seed bank are other ways you can ensure that all your marijuana plants are female.
If you don’t have a choice of seeds, and some of your seeds may be male (like if you just found seeds) than you will want to get your plants to reveal their gender right away so you don’t have to waste time and energy on male plants.
For most marijuana strains, the male plants don’t produce usable amounts of THC, so most growers toss them on sight. Unfortunately, 50% of all regular seeds will become male plants.
These male plants can also impregnate your female plants, which causes them not to produce as many buds, so unless you’re breeding, destroy male plants as soon as you notice them growing grape-like balls where their buds would normally be.
A vigilant grower can carefully watch their plants and remove males when they develop the first signs of pollen sacs.
How to identify female plants if starting out with regular bagseed?
You don’t have to wait for the flowering stage! Below we’ll share two tactics growers use to identify gender in the vegetative stage.
Tactic 1: Preflowers let you identify plants in week 3-6 from seed
Pre-Flowers reveal the gender of your plant by around week 6 from seed, and as early as 3 weeks from seed for some plants.
In this area you’ll find pre-flowers nestled where the “joints” of the plant are.
Tactic 2: Taking a clone and flowering it
The following method can help you identify gender for plants that are taking a while to show their pre-flowers.
If you’re just growing 1, 2, or 3 plants, it can be heartbreaking to find out all your plants are male, and you need to start over in order to make buds.
When marijuana plants are seedlings (or when they’re just seeds), there’s no way to tell which plants are male and which plants are female.
You have to “wait and see.” Male marijuana plants develop pollen sacs (look like little balls or nuts). Female marijuana plants start growing white hairs that develop into the marijuana buds (sensimilla) that contain THC and other cannabinoids. Lots of pictures of male and female parts above.
However, you may want to be more proactive and get rid of the male plants before they enter the flowering stage so you don’t have to waste the time and energy in caring for plants that you will eventually get rid of. If so, then you can use to following technique to identify and remove all the males from your grow.
How to Determine Sex of a Marijuana Plant
You can wait until your plants naturally show the first signs of their gender and then remove all the males, but that means you have to watch the plants closely. You also will waste time and energy growing plants only to find out that some or all are male and have to throw them away. If you want to be more proactive and get rid of all male plants right away, then use this technique.
Take a clone from the unverified marijuana plant
Label both the clone and the mother plant so you know which clone came from which corresponding mother. If you don’t label them clearly, then all your effort will go to waste!
Once the clones have established roots, change just the clones into flowering mode by providing them with a light schedule of 12 hours on, 12 hours off
The clones should start revealing their gender in a week or two. Males will start developing balls and females will start developing white hairs. Click on the pictures below to see some examples of male and female plants.
Once you have determined the gender of your clones, you should make sure you throw away any corresponding male plants.