When it comes to harvesting home-grown marijuana, female plants are the name of the game. Not only do female plants produce the coveted buds needed for medicinal purposes, but they also have higher potency and THC content compared to their… Learn how to tell the difference between male and female cannabis plants, so you can properly sex your cannabis in the early pre-flower stage. Learn about marijuana life stages and gender. When does the plant start flowering? How can you tell if your plant is a boy or a girl? What…
How to Identify Female and Male Marijuana Plants
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 23 people, some anonymous, worked to edit and improve it over time.
wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 59 testimonials and 95% of readers who voted found it helpful, earning it our reader-approved status.
This article has been viewed 2,342,922 times.
When it comes to harvesting home-grown marijuana, female plants are the name of the game. Not only do female plants produce the coveted buds needed for medicinal purposes, but they also have higher potency and THC content compared to their male counterparts. You’re in good hands—we’ve outlined everything you need to know about identifying female and male marijuana plants, so you can easily make the most out of your crop at home.
Look for thicker, sturdier stalks with fewer leaves on male plants. A male plant, compared to a female plant of the same strain, generally has a thicker stalk. That is because it gets taller than female plants and needs to be able to support the weight. They also have fewer leaves than female plants.  X Research source
- You need to check every plant to determine if it is male or female, as one rogue male can wreck your harvest.
- In general, male plants show their sex 7-10 days (indoor) or 3 weeks (outdoor) before female plants.
- If you’re trying to create new plants or reproduce, you need to leave these balls undisturbed.
- Female plants will have these bulbs too, but will also have long, translucent hairs on them. If you only see 1-2 on a plant, wait and see if more develop before cutting them.
- “Hermies” are generally undesirable plants, and they can ruin a small crop with their pollen if you’re not careful.
Throw out or remove male plants unless you specifically want seeds. Once you’ve determined a plant is male, you need to get rid of it or it will ruin your crop. Do not try and remove the buds by hand, as missing even a few will significantly decrease your crop. While most growers simply throw the plants out, a few keep them around for breeding purposes. If you do, put them in a separate room from the females, and make sure you don’t track pollen in from the male room to the female room on your clothes or hands.  X Research source www.theweedblog.com/sexing-your-outdoor-marijuana-plants/
- You can purchase “feminized” seeds as well, which usually create close to 100% female plants. However, there are occasional errors, and you should still keep a close eye on your plants to make sure there are no rogue males.  X Research source www.theweedblog.com/sexing-your-outdoor-marijuana-plants/
Note fuller bodies of leaves, when compared to males, on a grown female plant. If you’re trying to sex mature plants, one of the easiest indicators is how bushy they get. Male plants have thicker, sturdier stalks and very few leaves. A female of the same strain will be shorter and bushier, with more leaves, especially near the top.
- Male plants will have the small buds (pollen sacs) but will not have the associated hair growing out of it.
- Plants can grow both pollen sacs and pistils. If it does, it is hermaphroditic and should be treated like a male.
Separate your females from any males, as only females create buds. Only female plants will produce enough THC to be used as medicine, but they won’t create much if they become fertilized. The pistil is meant to attract pollen. If it gets it, it will create a seed, and all the plants energy and nutrients will be spent making seeds, not making big, THC-full buds. Your female plants are the only ones that will produce a crop, but only if they stay away from the males.
In general it’s not a good idea, because you can bring bugs and other things into your house, but as long as it’s not being kept around indoor plants, it should work. Just make sure to keep an eye on the plant and give it plenty of fresh air, as that is likely what it is used to. Keep in mind that the sun is the best grow light, though, so you should leave it outdoors if you can!
It needs a light cycle with a minimum of 12 hours of uninterrupted, complete darkness every day to trigger and maintain flowering.
Be grateful, because you probably have female plants. Female plants are the only plants that produce buds.
I have a 6 month old indoor plant but it is not budding or showing any male gender. The plant stands about 51 inches tall; it appears to be healthy, very green, most of the nodes are standing up instead of sagging. What could be the problem?
Plants usually need around 12 hours of darkness to bud. That is why they bud at the end of the summer. If you have these indoors where they get light for more than 12 hours, that is your problem.
Cut the smallest branch and make sure it’s one of the young ones that will be flowering. This is called cloning.
A plant with 3 leaves is ruderalis, a wild outdoor variety. There are 5 types: indica, sativa, ruderalis, Australian bastard weed, and duck’s foot.
Many advise metal halide for vegetation and high pressure sodium for flowering. If your want to use blue light for vegetation, use 6500 k (cool white) CFL because you can keep them close and avoid stretch. HPS is fine for the entire grow because the lack of blue keeps them short.
Let the soil dry out before watering again. Cannabis plants are resilient and will usually recuperate from over-watering.
Check frequently once your plants have hit the 6-week mark — you want to know you plant’s sex as soon as you can.
You Might Also Like
- ↑ www.theweedblog.com/sexing-your-outdoor-marijuana-plants/
- ↑ www.theweedblog.com/sexing-your-outdoor-marijuana-plants/
About This Article
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 23 people, some anonymous, worked to edit and improve it over time. This article has been viewed 2,342,922 times.
If you’re growing marijuana plants, it’s important to be able to tell male and female plants apart, since only the females produce the buds that contain high concentrations of THC. To identify male and female marijuana plants, make sure they’ve been growing for at least 6 weeks, since both types of plant look the same in their early stages. Then, look for male plants to have thicker stalks and fewer leaves than their female counterparts. You can also tell if a plant is male by checking for little flowers or bulbs at the joints of the stalk and branches. By contrast, you’ll see small, translucent hairs on the same areas of a female plant. Once you’ve identified that a plant is male, remove it from your growing area to prevent it from pollinating the female plants, which will result in your THC harvest being reduced. For tips on what to do with plants that have both male and female organs, read on!
Sexing Cannabis: How to Tell the Difference Between Young Male vs Female Cannabis Plants
Are you growing cannabis at home, but aren’t sure if your plants are male or female? Then you’ve come to the right place! This article is going to show you how to tell the difference between male and female cannabis plants to properly sex them.
In particular, I want to show you how we determine the sex of our cannabis plants while they are still quite young. It gets significantly more obvious as the plants begin to mature and flower. On the other hand, it can be a bit more tricky to sex cannabis plants in the early pre-flower phase, but it is definitely possible! We’ll also talk a bit about why it is important to determine the sex of cannabis plants, the difference between regular and feminized seeds, how we treat our plants up until the time we know their sex, and what to do with unwanted male plants.
If you’re new to Homestead and Chill, be sure to check out our other cannabis-related articles! We primarily grow outdoors, 100% organic, and aim to provide helpful information that is easy to follow – both for new and experienced growers alike. As a disclaimer, this article is intended for those who can legally grow cannabis at home.
Feminized vs Regular Cannabis Seeds
If you are growing from feminized seeds, you shouldn’t need to worry about sexing your cannabis plants all that much. While not 100% guaranteed, there is only a very slim chance that a feminized seed will produce a male plant. About 1% in fact. In all of our years growing, we have never had a cannabis plant grown from feminized seed turn out to be a male – though we only grow a handful of plants per year. Folks who grow hundreds of plants could potentially end with a rare male now and then.
Feminized seeds are highly desirable to most growers. They’re efficient. It is almost sure-fire that you’re spending your energy and resources raising ladies. However, some growers accept or even prefer regular (unsexed) seeds! We grow a little of both.
Why grow regular cannabis seeds? Well, maybe a particular breeder or strain you want to try only carries regular seeds. Some growers feel that the feminization process is unnatural, and prefer to kick it old school by growing regular seeds only. Some enjoy the gamble and challenge. Whatever the reason, when you grow cannabis from regular seeds, the odds of getting all lady plants are not in your favor. You will end up with some males. Therefore, you need to learn to sex your cannabis plants! Also, we always start several extra “regular” seeds – assuming a 50/50 chance that some will be culled because they are male.
How are feminized cannabis seeds made?
Curious about how feminized seeds are created? In a nutshell: most feminized seeds come from cannabis plants that have been treated and altered in a manner that inhibits male chromosomes. The most common method is to spray the plant repetitively (daily or more) with colloidal silver. Other chemicals and compounds can be used too, but are far less accessible. Colloidal silver is technically “non-toxic”, but you do not want to smoke it! Thus, the plant is sacrificial – used for the production of pollen and seeds only.
Repeated colloidal silver treatments cause repression of the plant’s ethylene, which is the stuff that creates male flowers. Instead, the treated female plant will grow pollen sacks full of FEMALE pollen (XX rather than XY). Then breeders use the female pollen to pollinate female flowers, resulting in the development of all-female seeds.
Another way to create feminized cannabis seeds is called rodelization. It is a more natural but unreliable method, and less frequently used by breeders. Near the end of a growing season, an un-pollinated female cannabis plant will sometimes produce pollen sacks in a desperate attempt to pollinate herself. That pollen can be used to try to create feminized seeds, but because ethylene hasn’t been repressed, may also result in male seeds.
Okay, back to sexing cannabis.
Why Sex Cannabis Plants? The Role of Male and Female Plants
For the most part, the average home grower wants female cannabis plants. The ladies are the ones that produce the fattest, most resinous and most potent flowers – aka buds. Male cannabis plants are only desirable if someone wants to breed cannabis and save seeds (which is a whole other topic for another day). Even then, the grower will want to spot the difference between the male and female plants and separate them early on, unless they want free cross-breeding and pollination between many types of strains.
Not only are the males less desirable, but male cannabis plants interfere with the quality and production of your female plant. Males grow pollen sacks, and produce pollen. When a female cannabis plant becomes pollinated by a nearby male, her energy shifts into producing seeds.
Like most things in nature, female cannabis plants have a biological drive to reproduce. After the deed has been done, she will sit back and relax. While a pollinated female cannabis plant WILL still develop decent size buds, they are usually lower quality and contain less THC and other desirable cannabinoids. Not to mention, they’ll be full of seeds. When left un-pollinated, a female cannabis plant’s flowers (buds) will continue to swell, develop more trichomes and become increasingly resinous. She is trying to get as sticky and large as possible to catch pollen in the wind. That sweet sinsemilla – aka unfertilized, seed-free cannabis.
When to Sex Cannabis Plants
Our goal here today is to learn how to tell the difference between male and female cannabis plants early on, so you can get the males away from the females as soon as possible! It will help protect your lady plants – but also spare you the wasted time, resources, and energy of tending to male plants that you don’t intend to keep.
Keeping in mind that every strain and grow set-up (e.g. indoors, outdoors, daylight hours) creates varying circumstances, most cannabis plants begin to pre-flower as early as 4 weeks after germination. By week 6, the pre-flowers begin to reveal their gender and you should be able to identify the sex using the tips to follow. Once the plants go into full flower (8 to 10 weeks on average, for a natural outdoor grow) the differences between male and female plants will be glaringly obvious. We’ll talk more about exactly what each sex looks like in a moment.
Until we can tell the sex for sure, we continue to treat the plants equally. We start our seeds in small 4-inch nursery pots. About two weeks after germination, we pot the seedlings up into an approximately two-gallon (trade size) “sexing pot” like these BPA-free nursery pots. This enables everyone to continue to grow in a happy and healthy manner for several more weeks*. Then, once we can surely tell the difference between the male and female cannabis plants, only the ladies move into their forever home – 15 to 25 gallon grow bags full of recycled organic living soil. To learn more about our soil recipe and how we maintain it, see this article.
*Note that our feminized seedlings go from a 4” pot to an 8” pot, and then more quickly into large grow bags, using less soil in the potting-up process.
This little girl (or boy) is far too young to tell, but needs to be potted up soon. The two in plastic pots in the background were determined to be male and culled the next day. The two on the left in grow bags are definite females (one from feminized seed, and one we sexed from regular seed).
How to Tell the Difference Between Male and Female Cannabis Plants in Pre-Flower
In order to correctly sex cannabis plants, you’ll need to become familiar with their anatomy in general. Both males and females produce pre-flowers and flowers in the junctions between stems or branches. The very first pre-flowers show up in the crook between the main plant stalk and a fan leaf stem (petiole), usually near the top of the plant. The good news is, the males usually begin to develop and show sooner than females. I guess the idea is that the dudes want to have their pollen ready and waiting for when the ladies join the party?
Look for plant pre-flowers at the higher stalk/branch junctions, as described above. If needed, use a jeweler’s loupe to get a better look! That is the same magnifying tool commonly used to examine trichomes and determine plant readiness for harvest. Then, locate the stipule, which is a leafy pointed flap that protrudes from the junction. Don’t confuse that for a pre-flower! The cannabis sex parts are located just behind the stipule. Behind the pre-flower sex parts, taller growth tips will emerge – future auxiliary branches that produce buds.
Identifying a Male Cannabis Plant
Very early, the male pre-flower (early pollen sacs) simply looks like a more round version than the female pre-flower part. It is often referred to as a “spade”, like the spade suit in cards – squatty with a bulbous bottom and very slight tip. As it becomes slightly larger, the male pre-flower resembles a ball at the end of a stick. The male pre-flower is called a staminate. Then, the staminate eventually develops into a long hanging sack of baby bananas – the pollen sacs. Hopefully you can ID and cull the males before they get to this stage.
A 4-5 week old male cannabis plant in our garden, showing his stick and ball. Note that this is a really early and obvious example. Most of the other males in this age group show a round ball, but protruding less and more nestled flat against the stalk.
A more advanced male pre-flower, courtesy of Dr. Weedly (We never let our males get this far to photograph)
Did someone order a banana hammock? The male flowers are about to open and shed pollen, if they haven’t already. Photo from Green Cultured
Identifying a Female Cannabis Plant
In contrast, the very early female cannabis pre-flowers are more ovate in shape: pear-like, but with a longer slender pointed tip. That is called her calyx. Extending from the tip of the calyx may be a pair of pistils, or white hair-like protrusions. However, please note that not every female cannabis plant in pre-flower produces pistils.
If you are still unsure of the sex of your cannabis plant, wait to make any drastic decisions! Yet if you’re fairly certain, consider some of these other common differences between male and female plants. Perhaps it will help you more confidently make a decision.
Other Common Differences Between Male and Female Cannabis Plants
Aside from the clear-cut flower differences, there are a few (potential) trending characteristics between male and female cannabis plants. In many cases, male cannabis plants tend to be more gangly. They may be tall, narrow, have fewer fan leaves, and longer spacing between branches – also referred to as greater inter-nodal spacing. On the flip side, female cannabis plants are usually more compact and bushy than males.
Please keep in mind that these traits are not guaranteed, and shouldn’t be the only way to sex cannabis plants! Variations among strains and phenotypes can lead to all sorts of crazy things. The general plant structure simply may help give you a clue if you’re on the fence.
My Cannabis Plant is Male! Now What?
I hope you started a few extra seeds, and have plenty of ladies left to grow! Once you determine that you have a male cannabis plant, get rid of it. Again, unless you want pollination and seeds, it is best to cull the males as early as possible. Simply separating the plants isn’t enough. Even if you relocate the male plant to another part of your yard, the pollen can carry in the wind. There are stories of female cannabis plants becoming pollinated from neighbors growing several blocks away.
However, the culled males don’t need to go to waste! One option is to chop up the male plant and use it to mulch other plants – much like we do with borage, fava bean greens, yarrow, and comfrey. You could also juice the leaves, which are full of nutrients. Heck, you could even steep the plant material in water to create a natural fertilizer as we do with stinging nettle. Finally, I’m sure your compost pile will welcome the male plant with open arms. Or would that be… with open worms?
Need a chill pill, minus the pill? Check out favorite organic full-spectrum CBD oil – NuVita! Use our affiliate code “DEANNACAT” to save 10% any time. With less than 0.3% THC, it is non-psychoactive and legal in the US. The orange label is great for anxiety, stress, inflammation, and pain – anytime. The CBG (white) has some added power against inflammation, IBS, nausea, and cancer cell growth. CBN (black) will help you sleep more soundly while also easing tension, perfect for bedtime use.
And that is how you determine the sex of cannabis plants.
In closing, I hope this article is interesting and useful in your homegrown adventures. Please feel free to ask questions in the comments below, and spread the cannabis sex love by sharing this article. Even if you like to grow mostly feminized seeds, don’t you find this stuff fascinating? I sure do. Thanks for tuning in and nerding out with me a bit. Best of luck this growing season!
Male vs Female Cannabis Plants
Did you know there are both male and female marijuana plants? Yes, marijuana plants show gender, and the sex matters a lot to the grower.
That’s because only female plants produce buds. How do you grow female plants?
Regular marijuana seeds will be 50% male, and 50% female. That means half of the seeds will be unusable as far as growing buds.
One way around this is to purchased feminized seeds online. These seeds are available from all reputable online seedbanks, and the plants produced by these seeds are always female.
You can also make your own feminized seeds, but you have to start with two known female plants.
When do marijuana plants reveal their gender?
Cannabis plants go through two stages of life, the “vegetative” stage and the “flowering stage.”
They first go through the vegetative life stage, which you can sort of consider its “childhood” since the plant is only focusing on growing bigger and taller, and gender doesn’t matter. At the beginning of this stage you usually can’t tell what the plant’s gender is.
However, once the plant is about 6 weeks old, it will usually show signs of “pre-flowers” which will alert you to the gender before the beginning of the flowering stage.
Pre-Flowers usually reveal the gender around week 6 from seed
Otherwise you must wait for the flowering stage
Next, cannabis plants switch to the flowering stage which means they stop growing bigger and taller, and instead spend all their effort growing flowers (the buds we want are flowers!). The flowering stage is like the “adult” stage of a cannabis plant since at this point it’s only interested in adult stuff like growing their male and female parts, then pollinating In the flowering stage, plants start growing buds or pollen sacs in earnest. The buds we want are female flowers, so growers generally only want to grow female plants.
Growers Want Female Cannabis Plants – These Produce Bud
Regular Marijuana plants reveal their gender in two situations:
After spending a long time in the vegetative stage – some strains/plants will show preflowers (pistils for girls and “balls” for boys) during the vegetative stage if they grow old enough, even when they are constantly kept under a vegetative light schedule. For example, clones can come from plants that are several years old, so you’ll see a lot of clones have female pistils showing, yet will not continue to flower any more than that until after they’ve been switched to a Flowering (12-12) light schedule
Otherwise, all remaining plants will reveal their gender in the first 1-3 weeks after lights are switched to 12-12, and plants enter the flowering stage of life.
When your cannabis plant is about to reveal it’s gender, what you’re looking for is cannabis “pre-flowers.” These usually show up when the plant is around 6 weeks old from seed, but they always appear once the plant is changed over to the flowering stage.
Male and female pre-flowers look different from each other (though it can be easy to confuse them at first). Sometimes it’s hard to tell which is which at first, and in that case you’ll just have to wait until they develop a few more flowers and it becomes more obvious.
Diagram Showing What Pre-Flowers Look Like
Male pre-flowers on left – Female pre-flowers on right
Female Marijuana Plant Pictures
Female marijuana plants take a bit longer than males to show their first signs after being changed over to flowering.
Female marijuana plants start showing one or two wispy white hairs where their buds are going to start forming.
They usually first show up where the main stem connects to the individual nodes or ‘branches’.
If a female plant is kept in the vegetative stage long enough (the length of time varies depending on the strain and conditions), then she will start showing the first sign of female hairs even before you move the plant into the flowering stage by changing the light schedule.
If you see wispy white hairs appearing on your plant like the ones pictured below, then you know you have a female plant.
Click on thumbnails for larger picture
In this pic, you can see white pistils emerging from the calyxes. Female pistils are white and wispy, never green.
This pre-flower doesn’t have a pistil sticking out at first, but the shape helps tell you it’s a female plant. If you’re not sure about gender after spotting a pre-flower, it’s a good idea to wait and see for a little while, just to see if a white hair appears (which means it’s definitely a girl)
Adult Female Cannabis Plant Pictures
Those buds turn into this!
Male Marijuana Plant Pictures
Male plants have grape-like balls which form and fill with pollen. The balls will first show up a week or two after changing the plants over to the flowering stage. If the male is allowed to continue growing, eventually these pollen sacs will burst open and spill pollen everywhere.
A small male pre-flower – this is what male plants look like when they first reveal their gender
These male pre-flowers are basically immature pollen sacs. When the plant starts flowering, they will grow and turn into bunches that almost look like grapes.
Click on thumbnails for larger picture
Uncertain pre-flower – ended up being female!
Sometimes it takes a day or two for a female pre-flower to release her first pistil, and the female calyx can look like the beginning of a pollen sac. Generally the more “pointy” ones tend to be female, but sometimes you have to wait and see a few more flowers to know for sure.
Marijuana plants go through 2 life stages: Vegetative and Flowering
Quick Key to Light Schedules For Photoperiod (Non-Autoflowering) Strains
This key breaks down some of the terms used in the article below such as “24-0″ or 12-12”
Vegetative – Indoor cannabis plants kept on these light schedules will display only vegetative growth
18-6 – 18 Hours Light / 6 Hours Darkness each Day
24-0 – 24 Hours Light / 0 Hours Darkness each Day
Flowering – Indoor cannabis plants on this light schedule will start growing flowers (buds)
12-12 – 12 Hours Light / 12 Hours Darkness each Day
* Most indoor growers use a timer to turn their lights on and off automatically.
The first stage, “Vegetative” begins when they first sprout, at the beginning of their life.
Most growers give their plants 18-24 hours of light a day during the vegetative stage.
When a plant is about half the final size you want it to be, you should change it over to the “Flowering” stage.
The second life stage, “Flowering,” is the stage your plant will remain in until harvest..
You get marijuana plants start flowering (making buds) by changing your light schedule to 12-12.
That means you use an electric timer to automatically shine your grow lights for 12 hours a day, with 12 hours of uninterrupted TOTAL darkness during the plant’s “night period.”
Marijuana plants should reveal the first signs of their gender within 2-3 weeks after being changed to 12-12.
How Light Schedules Affect Marijuana Life Stages
Marijuana plants have an internal process where they can detect how long they receive uninterrupted darkness each day.
In the wild, as the days get shorter and nights get longer, the marijuana plant “realizes” that winter is coming and will start budding/flowering as it approaches the end of it’s lifecycle.
When growing marijuana outdoors, a grower doesn’t need to do anything to induce flowering because the sun will take care of things on its own. All you need to do is make sure your plant isn’t directly under a street light or other light source, so that the plant receives complete darkness at night.
However, when growing marijuana indoors, a marijuana gardener will have to “fool” their plants into thinking winter is coming to induce flowering and kickstart the creation of buds.
This is done by changing the plant’s light schedule to 12-12, where the weed plants gets 12 hours of light a day and 12 hours of total darkness.
It’s easier to ensure the plant gets the 12 full hours of darkness each night when the start and end time for your lights to turn on and off is exactly the same each day. This is why most growers end up getting a timer to turn their lights on and off automatically.
I tend to set my timer in flowering to shine line from 7pm-7am. This gives me time to check on my plants at night when the lights first come on, and I can also check them quickly in the morning before I go to work. It also keeps things cooler since the lights are on at night. Some people (like myself) also get discounts on electricity that’s used at night.
But ANY 12 hour dark period will work, as long as you prevent your plant from getting light leaks during their “night.”
In fact, with marijuana plants, the length of night period, not the length of day period, seems to make the biggest difference. This makes sense if you consider that in the wild, a stormy or cloudy day could shorten the light period a plant receives, but few things in the wild will interrupt the darkness of night.
This has been experimentally verified by some out-of-the-box thinkers. They gave marijuana plants different amounts of light and dark, then watched what happened.
What they found is that a marijuana plant will stay flowering as long as she gets 12+ hours of darkness on a regular basis. The length of day period didn’t seem to matter at all. In fact, you could give plants 12 hours of dark followed by 24 hours of light, on a regular basis, and plants would continue to flower as long as their darkness was uninterrupted for 12 hours at a time.
Check out my marijuana grow light guide for more info about picking out the right grow lights for your situation!
Photoperiod dependent strains vs. auto-flowering strains
So all strains of cannabis that respond to light in this way (where the light period effects what stage they’re in) are called “Photoperiod dependent” strains.
“Auto-flowering” marijuana strains pretty much ignore how much light they get each day. Generally you don’t run into these unless you buy them particularly from a cannabis seed bank.
Marijuana plants have a gender: Is my plant Male or Female?
(Some marijuana plants can also be hermaphrodites, which means they display both male and female parts on the same plant)
Most growers prefer to grow female plants, as only female plant produce buds/flowers.
Note: Once the plant is about 6 weeks old from seed, it will usually show signs of “pre-flowers” which will alert you to the gender before the beginning of the flowering stage.
Pre-Flowers usually reveal the gender around week 6 from seed, or you can wait until the plant switches to the flowering stage.
After 2-3 weeks of the 12-12 light schedule, most marijuana plants will reveal the first signs of their gender (they either are a female plant and start growing buds, YAY! or they are a male plant and start growing balls, NO!).
Why do I not want male marijuana plants?
Only a female marijuana plant makes flowers/buds that contain a usable amount of THC. Male marijuana plants only make pollen sacs that they use to fertilize the females. Most growers will throw away any male plants that they encounter to keep them from fertilizing the female plants. If your female plants do get fertilized, they will use all their energy to produce seeds instead of making buds. This is good if you want seeds, but you will run into the same problem since half of the seeds will also be male.
If you would like to start a breeding program to make your own hybrids, I recommend using a method that creates all-female (feminized) seeds so that you don’t waste time having to identify and throw out male plants.
Getting clones of female marijuana plants or buying feminized seeds online from a seed bank are other ways you can ensure that all your marijuana plants are female.
If you don’t have a choice of seeds, and some of your seeds may be male (like if you just found seeds) than you will want to get your plants to reveal their gender right away so you don’t have to waste time and energy on male plants.
For most marijuana strains, the male plants don’t produce usable amounts of THC, so most growers toss them on sight. Unfortunately, 50% of all regular seeds will become male plants.
These male plants can also impregnate your female plants, which causes them not to produce as many buds, so unless you’re breeding, destroy male plants as soon as you notice them growing grape-like balls where their buds would normally be.
A vigilant grower can carefully watch their plants and remove males when they develop the first signs of pollen sacs.
How to identify female plants if starting out with regular bagseed?
You don’t have to wait for the flowering stage! Below we’ll share two tactics growers use to identify gender in the vegetative stage.
Tactic 1: Preflowers let you identify plants in week 3-6 from seed
Pre-Flowers reveal the gender of your plant by around week 6 from seed, and as early as 3 weeks from seed for some plants.
In this area you’ll find pre-flowers nestled where the “joints” of the plant are.
Tactic 2: Taking a clone and flowering it
The following method can help you identify gender for plants that are taking a while to show their pre-flowers.
If you’re just growing 1, 2, or 3 plants, it can be heartbreaking to find out all your plants are male, and you need to start over in order to make buds.
When marijuana plants are seedlings (or when they’re just seeds), there’s no way to tell which plants are male and which plants are female.
You have to “wait and see.” Male marijuana plants develop pollen sacs (look like little balls or nuts). Female marijuana plants start growing white hairs that develop into the marijuana buds (sensimilla) that contain THC and other cannabinoids. Lots of pictures of male and female parts above.
However, you may want to be more proactive and get rid of the male plants before they enter the flowering stage so you don’t have to waste the time and energy in caring for plants that you will eventually get rid of. If so, then you can use to following technique to identify and remove all the males from your grow.
How to Determine Sex of a Marijuana Plant
You can wait until your plants naturally show the first signs of their gender and then remove all the males, but that means you have to watch the plants closely. You also will waste time and energy growing plants only to find out that some or all are male and have to throw them away. If you want to be more proactive and get rid of all male plants right away, then use this technique.
Take a clone from the unverified marijuana plant
Label both the clone and the mother plant so you know which clone came from which corresponding mother. If you don’t label them clearly, then all your effort will go to waste!
Once the clones have established roots, change just the clones into flowering mode by providing them with a light schedule of 12 hours on, 12 hours off
The clones should start revealing their gender in a week or two. Males will start developing balls and females will start developing white hairs. Click on the pictures below to see some examples of male and female plants.
Once you have determined the gender of your clones, you should make sure you throw away any corresponding male plants.