Categories
BLOG

coco weed soil

What’s the Best Growing Medium: Soil, Coco or Hydro?

Table of Contents

  • Soil or Compost
  • Soilless Mix (Especially Coco & Perlite)
  • Hydroponics

Introduction to Cannabis Grow Mediums

When talking about growing marijuana, what is a “grow medium”?

A growing medium or grow medium is what you’re growing your cannabis roots in, whether that substance is soil, perlite, coco coir, Rockwool, vermiculite, water, etc. Your marijuana plant will thrive as long as the roots have room to grow and have consistent access to fresh water, oxygen, and the proper nutrients in proper levels. There are a variety of ways to satisfy all these needs of a cannabis plant while growing, and each has its own pros and cons!

Every Grow Medium Must Help Roots Get What They Need: Water, Oxygen and the right Nutrients

Best Growing Mediums for Marijuana

The three main types of grow mediums for marijuana plants are soil mixes, soilless mixes and hydroponics (water). Let’s do a quick breakdown of each one, along with the pros and cons for marijuana growers!

  • Soil or Compost
  • Soilless Mix (Especially Coco & Perlite)
  • Hydroponics

Soil or Compost

Soil or compost is one of the most popular growing mediums for marijuana plants because it is natural, easy to use, and available everywhere.

Good cannabis soil naturally contains at least some amount of nutrients, which means it will provide the nutrients your plants need for at least the first few weeks of life.

Example of Great Cannabis Soil

If you decide to grow cannabis with soil, try using sterilized, loose, non-peat based potting compost. Often these are listed as an “organic potting mix.” I recommend soil mixes with at least 20-30% of a soil conditioner like perlite (little white rocks in the soil). This will provide drainage and keep higher amounts of air/oxygen in the soil, which causes cannabis plants to grow faster.

Plants in soil grow a little slower than in coco or hydro, but soil-grown buds tend to have a stronger smell/taste. Although using a standard soil potting mix and giving nutrients in the water gets results similar to coco, using amended and composted living soil tends to produce buds with a powerful and complex scent/taste profile.

Example of Amended and Composted Living Soil – Just add water!

With living soil, a colony of microorganisms in the soil creates an ecosystem that mimics the best-of-the-best soil in nature. The nutrients are slowly broken down from organic sources and delivered directly to your plant roots. For some reason, plants grown in this type of root environment tend to produce very strong-smelling buds. One thing that’s really great about living soil is you usually don’t need to use any added nutrients.

The result is strong-scented buds grown only with natural processes and all you have to do is just add water and let the soil do the magic! The biggest downside to living soil is that plants tend to grow a little slower than with other grow mediums, and some people don’t like the smell of the composted soil, especially in the house.

Common Cannabis-Friendly Soil Mixes in the US:

  • Composted and Amended “Hot” Soil (great)
  • Fox Farms Ocean Forest Soil (great)
  • Black Gold All Organic Potting Soil (good)
  • Espoma Organic Potting Mix (okay)

Example of Great Soil – Fox Farm Ocean Forest is rich and light, plus it’s packed with nutrients in the right ratio for growing cannabis!

Soilless Mediums (Coco Coir & Perlite)

Soilless potting mixtures that are composed of inert (non-soil) ingredients like coco coir, perlite, peat moss, Rockwool, and vermiculite can be a great choice for growing marijuana.

When growing in a soilless medium, you can treat your plants almost the same as if growing in soil. The main difference is you feed all their nutrients in the water. As a result of your plants getting nutrients delivered directly to their roots, you will often get quicker growth and higher yields than growing in soil (where the roots have to seek out nutrition).

Another advantage of growing in a soilless mix over soil is that you are less likely to run into problems with overwatering or bugs.

Although there are many different possible soilless ingredients, the most popular potting mixes for cannabis contain significant amounts of coco coir and perlite. This combination seems to work especially well for growing cannabis. As a result of coco’s growing popularity, other types of soilless mixes (especially the peat-based ones) have become far less common in cannabis grow rooms over the years.

Even when it comes to soil mixes, you still often see both coco and perlite in the ingredient list, because they help improve the overall properties of the soil.

In fact, I strongly recommend beginner growers start out their plants in a coco-based soilless potting mixture, and I have written a detailed tutorial on how to grow 4-7 oz. of marijuana using coco coir for first-time growers. I’ve also grown a pound of weed in a 2×4 tent using coco coir and a 315W LEC light!

I have personally found coco/perlite to be the most straightforward and forgiving growing medium for indoor cannabis, and over the years I’ve also seen that coco growers seem to be the least likely to run into problems during their first grow!

Coco coir is how I started growing, and I recommend it to anyone 🙂 Here’s me during my first grow with my coco-grown plants:

Learn how to grow cannabis with coco coir or view the Step-By-Step 250W Coco Tutorial to produce 4-7oz on your first grow with coco using auto-flowering strains. I highly recommend this tutorial for beginner growers looking to get started with their first grow!

Common Cannabis-Friendly Coco Coir Mixes in the US:

  • Mother Earth Coco + Perlite Mix (recommended)
  • Fox Farms Coco Loco (great)
  • Roots Organics Soilless Hydroponic Coco Media (great)
  • Make it yourself with our “Coco Coir Rehydration Tutorial (low cost!)

Hydroponics

When people are talking about hydroponics, they’re usually referring to growing your cannabis with the roots sitting directly in water. The most popular style of hydroponics for cannabis plants is known as Deep Water Culture (a.k.a. DWC), and it has a very popular variant known as “bubbleponics” or a top-fed Deep Water Culture (DWC) system.

DWC is one of the few types of hydroponics that can support larger plants. Other types of hydroponics (for example NFT or Aeroponics) have a difficult time growing plants as big and nutrient-hungry as cannabis.

Example of cannabis roots growing directly in a solution of nutrient water

Two hydroponic cannabis plants in the vegetative stage

Example of flowering DWC cannabis plants. They grow so quickly that they can quickly take over your grow room!

Hydroponics can be really scary, but I’ve seen so many first-time growers get great results with hydroponics. The most important thing to remember is to follow the instructions and always get a root supplement like Hydroguard. I love hydro. After growing for several years, I think it may be my favorite grow style. You get the fastest growth and most control over nutrients of any grow medium!

What exactly is hydroponics and is it good for growing marijuana?

By the end of a hydro grow, you may find yourself with huge masses of roots!

Conclusion: What’s the Best Grow Medium for Growing Cannabis?

  • Soil or Compost – Grow in organic composted living soil for the most complex-smelling buds and a “just add water” growing experience. Or start with a cannabis-friendly soil mix such as the popular Fox Farms Ocean Forest soil mix (FFOF already contains enough nutrients to last the first month of your young plant’s life) and give nutrients in the water as plants get older.
  • Soilless Mix – Although this technically includes any grow mix that doesn’t include soil, with ingredients such as coco coir, perlite, vermiculite, etc., most cannabis growers use a mix that’s primarily made out of coco coir and perlite. All soilless mixes are technically considered hydroponic growing since there’s no soil, but most growers think of them as somewhere in between soil and hydro, and you get a lot of the best parts of both. I highly recommend a coco/perlite mix for your first cannabis grow!
  • Directly in Water / Hydroponics – Get some of the fastest growth possible, especially when combined with HID grow lights such as HPS or LECs. I’ve had many of successful grows using a top-fed DWC system, and I think it may be my favorite style of growing.

About Less Common Types of Hydro: Some people grow with plant roots suspended in misted air (aeroponics), in an assembly line (NFT), or in a tank with fish (aquaponics), but these are better suited to smaller plants, and not commonly used to grow cannabis.

So what’s REALLY the best medium? Alright, I’ll stop dancing around what you’re really here for. I’ll rank the popular mediums for different aspects, then I’ll tell you which one I think is the best overall…

Note: The contenders are Soil, Living Soil (composted), Coco Coir (soilless), Hydro (DWC – roots suspended in water)

  1. Hydro
  2. Coco Coir
  3. Soil
  4. Living Soil

Best Smell/Taste Profile:

  1. Living Soil
  2. Everything Else

  1. Living Soil
  2. Coco Coir
  3. Soil
  4. Hydro

  1. Hydro
  2. Coco Coir
  3. Soil
  4. Living Soil

Least Chance of Bugs/Pests:

  1. Hydro
  2. Coco Coir
  3. Soil
  4. Living Soil

BEST CANNABIS MEDIUM OVERALL:

Believe it or not, the best overall medium – in my opinion – is coco coir!

Allow me to explain…

Check out the rankings above; in this case, the medium with the lowest number ranks the best. If you add it all up, Coco Coir ends up being the winner and it’s clear why. Coco coir isn’t the best at anything, but it’s the second-best at pretty much everything: it grows almost as fast as hydro, it’s easier to use than soil, yields second best to hydro and gets fewer bugs than living soil. Coco coir is kind of a jack-of-all-trades and a master of none.

Another cool thing about coco coir is that it’s renewable, so it’s easier on the environment. Most soils use peat which is a finite resource, and hydro can add nutrient water to the water supply. Properly used coco coir doesn’t have any of these problems so you can feel good about using it. Unfortunately, perlite – which is almost always used with coco coir – isn’t renewable, so in a sense, coco coir isn’t renewable because of its dependence on perlite.

Each growing medium that you can use has different care and watering requirements.

Best of the Best: Grow Medium Roundup

We declared coco coir the winner of this little contest, but all the mediums are the best at one thing. Get the best brand of cannabis grow medium to match your preference and grow style.

Common Cannabis-Friendly Coco Coir Mixes in the US:

  • Mother Earth Coco + Perlite Mix (recommended)
  • Fox Farms Coco Loco (great)
  • Roots Organics Soilless Hydroponic Coco Media (great)
  • Make it yourself with our “Coco Coir Rehydration Tutorial (low cost!)

Common Cannabis-Friendly “Living” Soil Mixes in the US:

  • Composted and Amended Living “Super” Soil by Kind Soil (recommended)
  • Super Soil Grower’s Mix by Coast of Maine (good)

Common Cannabis-Friendly Soil Mixes in the US:

  • Fox Farms Ocean Forest Soil (great)
  • Black Gold All Organic Potting Soil (good)
  • Espoma Organic Potting Mix (okay)

Give Roots Room to Breathe!

When growing cannabis in containers, for example with soil or coco, it’s important to give your plant roots enough room to grow. If they run out of space, it will limit the size of your plant, and often causes nutrient deficiencies and other problems like persistent droopiness. If your roots have circled around the edges of the container, it is rootbound and should be transplanted to a bigger container immediately!

Plants don’t really get “rootbound” in hydroponics because the roots are being constantly bathed in a nutrient water solution that provides both nutrients and oxygen to all parts of the roots. However, if the reservoir is too small your plants will drink all the water before you can replace it!

Your cannabis plants need a grow medium! Hopefully, today’s tutorial will help you pick the perfect one for your needs!

You Might Enjoy the Following Growing Tutorials…

More About Various Grow Mediums

  • Yields
  • Bud Quality
  • THC Levels
  • CBD Levels
  • Smell/Taste
  • Density
  • Bud Color (How to Grow Pink or Purple Buds)
  • Glitter (Make Buds Sparkle with More Trichomes)
  • Bonus: What Determines Yields?

What medium makes the best home for your cannabis plants? Is it soil? Hydro? Coco? We'll tell you all about your options and which is the best all around!

How to Grow Cannabis in Coco Coir

Table of Contents

Are you interested in growing cannabis with coco coir? Coco coir is a highly productive growing medium for cannabis that gives the experience of growing in soil, but many of the benefits of growing weed in hydro, including fewer bugs and faster growth.

A lot of cannabis growers have started using coco coir in their garden, but there isn’t a lot of information about exactly how to use coco coir for cannabis. It can be confusing since coco coir usually comes in dehydrated bricks with no instructions.

Coco seems almost tailor-made for growing cannabis… as long as you follow basic instructions.

What is Coco Coir?

Coco coir is made of ground-up coconut husks and works surprisingly well as a medium for growing plants. Roots love it. Coco is also more environmentally friendly than peat moss (one of its main competitors), and coco is slowly replacing peat in many soil potting mixes.

Note: “Coir” is officially pronounced “coy-er” but I’ve noticed most cannabis growers say “kwar” (rhymes with “car”).

Coco coir is a versatile growing medium which can be used by itself or mixed with other ingredients. It’s often included in soil potting mixes to help correct compaction and loosen the soil while still retaining plenty of water. For example, Fox Farm Coco Loco is a great choice for soil growers who want some of the benefits of coco.

However, this tutorial focuses on coco growing that doesn’t involve any soil or non-inert ingredients, in order to achieve the fastest growth. You’ll learn how to grow with a coco/perlite mix and provide nutrients in the water. This root environment creates thriving cannabis plants.

As long as you remember to water your plants with nutrients as directed, coco plants tend to be hardier than plants in other grow mediums. You typically won’t get bugs like in soil, or root rot like in hydro. It’s rare for a coco grower to run into major problems that prevent them from getting to harvest when they follow these directions. Because of that, I believe coco is one of the best grow mediums for new growers. Plus, you’ll learn almost all the skills you need to grow in soil or hydro in the future. Coco gives you a great base of knowledge for growing cannabis that will serve you well even if you branch out to other grow mediums.

Cannabis Plants Thrive When Growing in Coco Coir!

Why Use Coco Coir for Growing Cannabis?

  • Feels Like Growing in Soil – Coco coir is a soilless growing medium that gives the experience of growing in soil. Plants are kept in regular pots, and growers simply water their plants with nutrient water. In most ways, coco coir can be treated basically the same as soil for growing cannabis.
  • Great for Plant Roots – Coco coir tends to promote healthy and fast root development compared to other potting mixes. It holds onto moisture and nutrients, yet also has a light texture that gives roots access to oxygen, too. This makes plants less likely to experience symptoms from over or under-watering.
  • Good for the Environment – Unlike peat, coco coir is sustainable for the environment. It also doesn’t have to be replaced every grow. Instead of breaking down like peat, coco coir is slow to break down and can be used more than once after a good rinsing.
  • Does Not Attract Insects – Coco coir does not make a good home for many garden pests that affect soil growers. Cannabis growing in coco coir are much less likely to be attacked by pests or bugs.
  • Plants Grow Faster than Soil – Coco gives a lot of benefits of hydroponics, which causes plants to grow fast by providing nutrients to the roots in the most easily accessible form. Plant roots don’t have to go out and search for nutrients, saving the plant precious energy. But growing directly in water can be complicated. Coco coir gives many of the benefits of hydro with a soil experience. This results in a quicker harvest and bigger yields for you as the grower.

Which Pre-Made Coco Mix to Get?

Although you can re-hydrate coco bricks at home, a pre-made mix takes out all the work! I highly recommend choosing a mix that contains both coco and perlite such as Mother Earth Coco Mix (70% coco / 30% perlite for growing cannabis. I’ve grown with Mother Earth at least a half dozen times and always get great results. Another pre-made coco mix I’ve tried that works great for growing marijuana is Roots Organics Coco Soilless Mix.

Cons of Growing Cannabis in Coco Coir

  • Must Provide Nutrients from the Beginning – Coco coir is an inert growing medium with no inherent nutritional value, so growers must provide nutrients and manage pH throughout the grow. However, this is also the case for many soil growers as well. Unless starting with composted super soil and using high-quality water, most soil growers end up having to add nutrients and manage pH just like with coco coir.
  • You Need a Cal-Mag Supplement – Cannabis plants grown in coco coir tends to need more calcium compared to other growing mediums, so usually, a standard “Cal-Mag” supplement is needed to make sure plants get all the calcium they need. These contain calcium as well as magnesium (which is needed for your plant to be able to use the calcium properly). Two great Cal-Mag supplements for cannabis are CaliMagic by General Hydroponics or CaliMagic by Botanicare. If you’re using a different nutrient company, chances are they have their own version of a Cal-Mag supplement. Whenever using any supplements, it’s a great idea to stick with the same company as your base nutrients in order to prevent the chance of unexpected interactions between two different brands.
  • Coco coir usually comes in dry bricks, so the bricks have to be re-hydrated before you can grow plants in the coir (explained below, it’s actually really easy). However, if you don’t mind spending a little bit more, there are pre-made mixes with coco coir that are formulated specifically for plants like cannabis.

Coco coir holds onto a lot of moisture but also holds onto more air than similar materials, so your plant roots get the oxygen they need to thrive. When mixed with perlite, it provides an ideal amount of water and air for cannabis roots. Coco coir drains well so plants are less likely to get overwatered, but it also holds onto nutrients so you use less fertilizer.

Once your plants are in a good coco coir mix, you just add nutrients, water and light to get happy plants.

Although growing cannabis in coco coir is becoming increasingly popular, one of the problems is that there’s not enough free information to help new growers know what to do. It’s only a few simple steps get your coco coir mix in tip-top shape, and this tutorial will show you exactly how to do it.

Which Nutrients for Coco Coir?

When growing cannabis in coco coir, always use nutrients made for coco coir or hydroponics. Most growers also benefit from adding a “Cal-Mag” supplement, which is a common gardening supplement that provides extra calcium. Learn more about which nutrients you should use for growing cannabis in coco coir.

There are pre-made coco coir mixes, but they are usually more expensive than the cost to make a mix yourself. A pre-made mix is heavy like soil because it’s already been hydrated with water. This makes pre-made coco coir mixes expensive to ship, and heavy to carry around. If you’re willing to rehydrate your coco at home, you can skip paying a premium for water.

Everything you need to make your coco coir mix can be sent discreetly to your house. You just need some coir bricks and an airy bag of perlite which can be bought at any garden store. With this method, there’s no lugging a huge bag of potting mix home, or paying for shipping to have it delivered.

This tutorial will show you how to re-hydrate coco coir bricks and mix with perlite to create a rich, cannabis-friendly potting mix. I will also share some hints about growing cannabis in coco coir and how to take care of your plants for the best results.

If you follow these instructions, you will end up with 9-10 gallons of potting mix. I used this to fill four 2-gallon pots plus six solo cups, which is a perfect amount of soil for me to grow 4 plants.

Ready to start your coco coir tutorial? Your garden will thank you for it!

Coco Coir Rehydration Tutorial: What You Need

Make It Yourself (Instructions Below) or
Buy a Pre-Made Coco Coir Mix!

Mother Earth Coco Mix is a highly recommended pre-made coco coir mix for growing cannabis. However, many coco mixes work great for growing marijuana, including FoxFarm Coco Loco and Roots Organics Coco Soilless Mix.

The following tutorial makes about 10 gallons of potting mix. Double the recipe for 20 gallons!

For this tutorial, I used two bricks of a standard 650g Coconut Coir Brick. Any similarly sized bricks from a reputable company will also work.

I used “Nature’s Footprint” Coco Coir, but any 650g Coconut Coir Brick will work great!

I have used Shultz, Espoma, Black Gold, and even Miracle-Gro brand perlite. Any 8-quart bag of perlite will work. Perlite can often be found in garden stores or the garden section of places like Home Depot and Lowes. I normally advise against all things Miracle-Gro, but their 8-quart bag of perlite is okay for this tutorial if you can’t find anything else. But remember, never use Miracle-Gro soil or their standard nutrient formula!

Any bag of horticultural perlite from any manufacturer will work for this tutorial!

I use a 10-gallon fabric container from Mad Farmer (basically a Smart Pot by a different company) because it’s sturdy, has handles and will stand up on its own after adding coco coir. ​ You could use a 10-gallon Smart Pot, two pillow cases stacked inside each other, or any other fabric container that lets water through and is tough enough to hold 5 gallons of soil.

Here’s the 10-gallon fabric pot & 5-gallon bucket in a bathtub

Note: You also need access to water and a drain for this coco coir tutorial.

Before You Get Started
(optional)

Run your finger nails over a bar of soap . This adds a layer of soap under your finger nails, which will prevent coco coir from getting stuck under your nails. Save yourself the time it takes to clean your nails after you’re all done!

See What You’re Making
Makes about 10 gallons of potting mix

This will make about 10 gallons of potting mix, just enough potting mix for…

2 x 5-gallon containers

OR 3 x 3-gallon containers plus a little extra

OR 4 x 2-gallon containers plus extra

OR any setup that uses about 10 gallons of potting mix

Note: I hydrate the two bricks one at a time in the 5-gallon bucket because the 5-gallon buckets are easier for mixing in perlite, and the whole process goes by in less than a half hour anyway even if you do bricks one at a time. If you wanted, you could hydrate both bricks at once in a 10 gallon container, but that’s too heavy for me to work with 🙂

How to Rehydrate Coco Coir & Mix in Perlite

1.) Gather all materials and place everything near your tub (or wherever you’re going to rehydrate to coco coir bricks)

2.) Line inside of 5-gallon bucket with fabric container.

The inside of the bucket should be lined all the way to the top, and you need to have enough extra to be able to easily grab the top so you can lift it up later.

3.) Put the first coco brick inside the liner

4.) Fill the bucket halfway with water.

Optimally, you can add a Cal-Mag supplement and pH this water to 6.0 before soaking. This can help make sure your coco coir has extra Calcium and also help it get into the right pH range right from the beginning.

Honestly though I often use water right out the tap. You’ll be adding Cal-Mag and setting the pH later, but the “best” way is to start supplementing your coco coir now, and it definitely may save you time and trouble later.

You’ll see the brick almost instantly starts getting soft once it makes contact with the water.

5.) Wait 8-10 minutes or until the coco coir gets fully hydrated.

If you stick your hand in and there’s no more hard parts left, then you’ve waited long enough. The coco coir should feel soft all the way through the bucket. You can mix the slurry around with your hands to get it to break up faster if you’re in a hurry.

Some growers let it soak longer, especially if they’re using pH’ed water that’s been supplemented with a Cal-Mag supplement, giving the coco more time to “take in” the good stuff. But I usually wait about 10 minutes and go to the next step.

6.) Pull liner up and out, letting water drain .

First let the majority of the extra water drain out into the bucket, then place the liner in the tub or on the ground so it can continue to let water drain out slowly.

7.) Pour half the 8-quart bag of perlite on top of your coco coir

8.) Mix in perlite with hands

Make sure to mix everything thoroughly, and check around the sides too, where you’ll often find pockets of perlite or straight coco coir. It’s really easy and quick. Just stick your hands in and mix everything together until it looks even all the way through 🙂

This moving gif should hopefully give you an idea.

After mixing, your potting mix will feel light and kind of soggy. You should end up with something that looks like this.

9.) Fill your containers with potting mix

One batch makes about 5 gallons of potting mix, so it should easily fill a 5-gallon container. You could also use it to fill 3 x 2-gallon containers or 2 x 3-gallon containers, though in both cases you’ll be a little short.

Don’t worry if the mix feels soaking wet, it will dry in the fabric pots once you have a fan blowing over them in your grow tent.

10.) Repeat steps for second brick of coco coir & remaining half of perlite bag

Now you fill the rest of your fabric containers and possibly solo cups for seedlings.

Note: If you do use solo cups, make sure to cut holes into the bottom so that water can drain out after you’ve watered your plants. Always test to make sure water runs through cup freely. If you have a hard time filling up an empty solo cup with water because it’s running out the bottom, you have added the right amount of drainage.

Recap: Do you have everything you need to make your coco coir mix? You’ll need the following items to complete the tutorial above.

  • 2 x 650g coco coir bricks
  • 8-quart bag of perlite
  • 10-gallon fabric pot
  • 4 x 2-gallon Smart Pots (or a total of about 8 gallons)
  • 5-gallon bucket

The above tutorial should leave you with about 10 gallons of potting mix.

Or Buy a Pre-Made Coco Coir Mix!

How to Grow Cannabis in Coco Coir

Now that you’ve got your mix ready (or purchased a pre-made coco coir mix), it’s time to start growing!

This isn’t the only way to grow cannabis in coco coir, but this is what I do and it works great. It directly follows the tutorial above for rehydrating coco coir and creating a coir-perlite potting mix.

Which Nutrients for Coco Coir?

Any quality cannabis nutrients made for hydroponics will work well as long as you also use a Cal-Mag supplement.

I personally like the General Hydroponics Flora trio plus Calimagic​ (a Cal-Mag supplement) for growing in coco coir.

This is a tried and tested nutrient system for any type of hydroponic growing including coco coir. You can actually follow their nutrient schedule listed on the included nutrient schedule; it’s formulated for plants like cannabis.

Note: After adding nutrients (or even if you’re giving just plain water), always pH your water to 5.5-6.5 before giving it to your plants. This is important!

Like nearly all cannabis nutrients, the included schedule is aggressive and can burn your plants if given with every watering. No matter what nutrient system you’re using with your coco coir, I recommend giving plain water every other watering to prevent nutrient buildup.

Whenever using liquid nutrients, you will need a way to test pH so your plant roots are able to easily absorb all the nutrients they need. I use a simple General Hydroponics pH test kit. Learn more about managing pH here: https://www.growweedeasy.com/ph​

How much Cal-Mag should I use for coco coir?

Give Cal-Mag at full strength alongside your nutrients for at least two weeks at the beginning of your grow. You may also add Cal-Mag with your other other nutrients if needed throughout the grow, though you may want to give it at lower doses.

What Else Do You Need?

  • Grow Lights
  • Plant Containers – I like fabric pots
  • Solo cups (optional)
  • Rapid Rooters (optional)

If you followed the above tutorial to make your own coco mix, you’ll have about 10 gallons of potting mix. This can be used to fill 2 x 5 gallon pots, 3 x 3 gallon pots, or 5 x 2-gallon containers.

I recommend larger containers for larger plants and to water less often. I recommend smaller containers for smaller plants, and when the grower is willing to water more often.

Step-by-Step Grow Cannabis Coco Coir Tutorial

1.) Germinate seeds in fresh Rapid Rooters on top of the moist but not soaking coco coir in your solo cups. Some growers will plant their seeds directly in the coco coir, and that works well, too. You can also place the Rapid Rooters in a tray, making sure there’s a very shallow pool of water at the bottom to keep them moist. Fresh Rapid Rooters give some of the best germination rates, but of course there’s other ways to start your plants. Learn about other ways to germinate cannabis seeds here: https://www.growweedeasy.com/germinate

2.) After seedling grows first set of “real” (serrated) leaves, water with nutrients at normal seedling strength , and add a regular dose of Cal-Mag (Calimagic). Keep giving water until you get about 20% runoff out the bottom of the solo cup. The first set of leaves are round, but the second set are serrated and pointy. Once you see those leaves, it’s time to water your seedling with nutrients.

3.) Maintain seedlings. Some growers will put their Rapid Rooters in solo cups, while others put their seedlings directly in their final container. Either way, your job is the same. Make sure your seedlings get plenty of light while making sure that it’s never too hot for your seedlings. Place your hands where your seedlings are and wait 10 seconds, if it’s too hot for you, it’s too hot for your plants.

  • Continue to water plants at full seedling strength of the included nutrient schedule for the General Hydroponics Flora Series plus Cal-Mag.
  • When watering, keep giving water until about 10-30% extra runs out the bottom. Then don’t water again until the top inch or so starts feeling dry to the touch. If you notice water is not draining out, you need to fix that right away. Water should be able to drain freely soon after you start watering.
  • Wait until the seedling has grown 3 sets of leaves…

3b.) If you started in solo cups, you should transplant to bigger containers once the seedlings have grown about 3 sets of leaves. Once your seedling has grown 3 sets of leaves, it’s time to transplant to a bigger container!

Dig a small hole in your coco coir containers so there’s room for the new seedlings. Take a butter knife and carefully slide it all around the edges of each solo cup, then carefully transplant your seedling into your bigger coco coir containers.

4.) Maintain vegetative plants until they are half the final desired size.

Cannabis nutrients tend to have schedules that give too high levels of nutrients for proper growth. If you’re using the custom nutrient schedule I created for you above, you can simply follow the instructions. But if you’re using a different nutrient system, I encourage you to start providing all nutrients in the water at half strength.

Continue to water plants with nutrients with 10-30% extra runoff. Continue to always adjust pH water to 5.5-6.5 before giving it to plants.

  • If desired, this stage is when you start plant training (I recommend waiting a few days after the transplant to make sure plant isn’t stressed before starting any training).
    Note: If you are growing auto-flowering plants from seed, it’s recommended you don’t use any plant training techniques besides LST.
  • If you notice the lower leaves are starting to yellow, and the yellowing seems to be climbing up the plant from the bottom, it probably means you have a nitrogen deficiency. Look at the nitrogen deficiency page to make sure. If you have a nitrogen deficiency at this stage, it means your plants need higher levels of nutrients. If so, increase your nutrient levels slowly, watching closely for signs of nutrient burn (which means too high levels of nutrients). Remember that yellow leaves will likely not turn green again, so don’t look to old leaves for recovery. What you’re looking for is making sure the problem isn’t still spreading to different leaves. It’s also likely that any improvement may take a few days after you provide increased nutrient levels. So don’t keep upping your dose until you’ve given your plant a few days to a week at the new level!
  • If you have any other problems besides a nitrogen deficiency, consult this page: https://www.growweedeasy.com/7-step-cure
  • Once plants are half the desired size, switch to the flowering stage (if you have auto-flowering plants, they will automatically switch to flowering after about 3 weeks).

​ This stage lasts until your plant is about half the size you want it to be in the end. After your plant has grown half the desired size, it’s time for the next step.

5.) Switch to the flowering stage. With regular plants, you do this by changing your light schedule to 12-12 (12 hours of light, plus 12 hours of uninterrupted darkness). With auto-flowering strains the switch to the flowering stage happens without you needing to do anything. Learn more about cannabis life stages and switching the flowering stage.

6.) Maintain flowering plants until they are ready to harvest. Care is basically the same as before, except during the flowering stage it becomes more important to control temperature and humidity than ever. Cannabis plants are much more finicky in the flowering stage, and it’s easy to trigger problems if you aren’t controlling your environment. Watch over plants closely, and make every effort to expose all bud sites to light and a breeze. You can still train plants by gently bending too-tall colas, but avoid any major training once the plant has started making buds.

7.) Harvest buds when ready. This tutorial will explain everything you need to know about when to harvest your plants: https://www.growweedeasy.com/harvest

Here are some additional nutrient suggestions for growing in coco coir:

Nutrient Picks For Growing in Coco Coir

Often when growing cannabis in coco coir, it is helpful to supplement with extra Calcium and Magnesium as calcium deficiencies & magnesium deficiencies are relatively common in coco coir. There are many supplements that provide a boost of these nutrients, and pretty much all of them will work fine. A commonly seen one called “Cal-Mag” by Botanicare works well (and is pretty inexpensive), and so does “CaliMagic” from General Hydroponics. Coco coir is an excellent growing medium as long as you maintain the pH between 5.5 – 6.5 and make sure the plants have enough calcium and magnesium.

Any quality cannabis nutrients made for hydroponics will work well for growing in coco coir as long as you also use a Cal-Mag supplement.

I personally like the General Hydroponics Flora trio plus Calimagic​ (a Cal-Mag supplement) for growing in coco coir. This is what I use for my coco coir grow. You can follow the nutrient schedule provided by GH as long as you provide plain water every other watering. Or…

You don’t need any other nutrients to grow marijuana; the Flora trio + Cal-Mag will give your cannabis plants what they need to flourish through the vegetative and flowering stages.

For the easiest coco coir growing, get a smart pot (pot made out of fabric – they work perfectly for growing cannabis and have good drainage).

Ever wondered how to use coco coir blocks to make a cannabis-friendly rich potting mix? This tutorial breaks it down… ]]>